Hammer Strength Select Leg Extension Commercial Gym Equipment

Description

Used, Like New Equipment. Fully Functional. No real signs of use.

Hammer Strength Select Leg Extension:

The Hammer Strength Select Leg Extension is a fundamental part of the strength training progression. All adjustments are accessible from the seated position, and the adjustable start position provides five different starting points. The 22 pieces in the Hammer Strength Select line provide an inviting introduction to Hammer Strength equipment.

Size (L x W x H)

47″ x 41″ x 64″ (metric cm: 119 x 104 x 163)

Recommended Live Area

89″ x 65″ x 64″ (metric cm: 226 x 165 x 163)

Machine Weight

570 lb (368 kg)

Weight Stack(s)

295 lb (138 kg)

Max User Weight

300 lb (136 kg)

Cables

7×19 strand construction, lubricated, nylon-coated cable meets U.S. military specifications

Instructional Placards

Easy-to-follow instructions illustrate proper use and muscles trained; Axis of rotation marked with red indicator to help cue correct alignment

Belts and Pulleys

4-1/2″ (11 cm) and 6″ (15 cm) diameter fiberglass-impregnated nylon pulleys feature sealed bearings

Cushioning

Pads are molded with radius on edge for improved comfort; All edges are stitched to eliminate any folds in the material that would limit durability

Shrouds

Standard rear shroud on SE models; Optional full front shroud on SE models

Weight Plates and Guide Rods

Solid-steel weight plates. Top weight plate is fitted with self-lubricating bushings; 7/16″ (11 mm) diameter weight selector pin magnetically locks in place and is connected to stack to prevent loss; Drop down incremental weight system (standard on SE models)

Adjustments

Roller mechanism on seat adjustment provides smooth operation

Foot Platforms

Polyethylene spray-coated for impact, corrosion, and abrasion resistance

Frame Description

Each frame receives an electrostatic powder coat finish to ensure maximum adhesion and durability; Standard rubber feet protect base of the frame and prevent the machine from slipping; 11-gauge steel frame ensures maximum structural integrity

Hand Grips

Grips retained with aluminum collars, preventing them from slipping during use; Hand grips are an extruded thermo rubber compound that is non-absorbing and wear-and-tear resistant

For a shipping quote, please message with:

1. Address

2. Commercial or Residential Location

3. Will you need a lift gate or is there a loading dock, forklift, tractor, etc.?